GMC Truck/SUV Instrument Cluster Removal
REMOVAL PROCEDURE:
1. Remove the instrument panel cluster (IPC) trim
plate bezel.
2. Remove the screws that retain the IPC to the instrument
panel (I/P) assembly
3. Remove the IPC (2) from the vehicle by tilting
the bottom of the cluster outward.
4. Disconnect the IPC harness (1) from the IPC.
INSTALLATION PROCEDURE
1. Connect the IPC harness (1) to the IPC (2).
2. Install the IPC onto the I/P with the screws. Tilt the
top of the cluster into the retainer first to avoid
damaging the flexible circuit connections.
3. Install the screws that retain the IPC to the I/P
assembly.
BEZEL REMOVAL
BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER
REMOVAL PROCEDURE:
1. Tilt the steering wheel to the full down position.
2. Remove the left closeout/insulator panel .
3. Remove the knee bolster trim panel.
4. Remove the screws that retain the bezel to the instrument panel.
5. Remove the bezel from the instrument panel.
Download a pdf of these instructions here