Jaguar S-Type Throttle Body Removal Instructions
WARNING: WHEN RELIEVING COOLING SYSTEM PRESSURE, COVER THE EXPANSION TANK CAP WITH A THICK CLOTH TO PREVENT THE POSSIBILITY OF SCALDING. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY.
CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate have a special coating applied during manufacture, which should not be removed.
Removal:
1. Turn the expansion cap counterclockwise a quarter turn to relieve the cooling system pressure.
2. Retighten the expansion tank cap.
3. Remove the air cleaner outlet tube.
Disconnect the throttle position sensor and electronic throttle body electrical connectors
Detach the throttle body
Discard the throttle body gasket
Remove the throttle body. Disconnect the coolant hoses (IF APPLICABLE)
Installation:
NOTE: Install a new throttle body gasket
1. To install, reverse the removal procedure. Fill up the cooling system as required.
Download a pdf of these instructions here