Ford Mustang Brake Computer Removal Instructions
Removal:
If your able to remove the mounting bracket enough to back the 6 torx screws out without bending the brake lines then you will be able to remove the ABS Module without removing any brakelines. The actual Removal Instructions call for the removal of the assembly ,HCU and EBCM.
1. Remove the hydraulic control unit (HCU).
2. Remove the pump motor electrical connector
3. Remove the anti-lock-brake control module screws.
4. Remove the anti-lock-brake control module from the HCU.
Installation:
1. Note: The brake system must be bled after the HCU is installed or replaced. To install, reverse the removal procedure.
Download a pdf of these instructions here.