Ford F Series Truck EATC Removal Instructions
REMOVAL
1. Disconnect the battery ground cable.
2. Detach the center instrument panel finish panel.
- Rotate the center instrument panel finish panel vents inward.
- Through the vent openings, grasp the center instrument panel finish panel and pull outward.
- Detach the center instrument panel finish panel.
3. Disconnect the Passenger Air Bag Deactivation (PAD) switch electrical connector
4. If equipped, disconnect the 4WD control switch connector.
- Remove the center instrument panel finish panel.
5. Remove the screws
6. Remove the EATC module.
- Disconnect the electrical connectors.
- Remove the nuts.
- Disconnect the vacuum harness connector and remove the EATC module.
INSTALLATION:
1. To install, reverse the removal procedure.
Download a pdf of these instructions here.