2002-2003 Jaguar X-type ABS Removal Instructions
Removal: (All vehicles)
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the harness plug by lifting the release tab,
4. remove the 6 torx type screws that attach the abs module to the pump
5. Do not remove the brake lines ,Do not remove the pump assembly
6. Disconnect the hydraulic control unit electrical connector. Vehicles with stability assist.
Disconnect the hydraulic control unit electrical connector. All vehicles
To install, reverse the removal procedure
Location: ENGINE COMPARTMENT
Download a pdf of these instructions here